Triniti® Bracket

Introducing the NEW Triniti RF Bracket.
The Triniti RF Bracket has been developed to satisfy the rising, unfulfilled demand for a thermally broken, retro-fitted curtain walling bracket.

The introduction of the Triniti RF bracket, with its high performance, specially formulated acrylic resin, represents a major ‘break-through’ for architects and specifiers. It is estimated that 80% of the UK’s commercial buildings are more than 10 years old and will require significant refurbishment before 2020 to ensure compliance with new building regulations.

The Triniti RF bracket has been subjected to rigorous testing, including more than 100,000 cyclic loading tests. The tests concluded that the Triniti RF bracket outperforms all other brackets on the market for its strength, its thermal characteristics and its ease of installation.

Thanks to Levolux’s Triniti RF bracket, a retro-fitted Solar Shading solution can now be applied cost-effectively and with minimal disruption, without compromising a building’s existing structural integrity.

The Triniti Bracket
General Arrangement

The Triniti bracket offers:

• Easy offsite installation,
• Significant reductions in cold bridging
• Effective Sound Isolation
• Zero Interstitial Condensation risk
• Superior strength

A hugely significant development in Solar Shading support systems.
Due to the demands of L2A and the need to reduce the amount of energy that can be absorbed through the building’s envelope, Levolux has designed, developed, and tested its Triniti Bracket to help cope with the demands of new building codes and regulations together with the introduction of short nosed curtain wall systems.

It outperforms all other brackets by offering:

• 70% improvement in the reduction of heat loss at the cold bridge point
• 95% isolation of audible sound being transferred to the building structure

Levolux’s Triniti bracket has been tested by the Centre for Window and Cladding Technology (CWCT) at Bath University that assessed the performance of the bracket in comparison to a standard curtain walling bracket.

The Triniti Curtain Walling Bracket comes complete with:

• Cast stainless steel spreader plate
• High performance Firmalyne thermal break
• Stainless steel adaptor
• High tensile bolts
• Firmalyne Insulated bolt caps and sleeves
• Extruded aluminium projecting spigot

The Triniti Bracket is designed to suit all the new short nosed mullion arrangements and existing systems, making it extremely versatile for designers and engineers alike.

UK Patent No.GB2444257, European design registration number 000832407-0001and OCT Application No.PCT/PCT/GB2007/004489

For More Information about the New Triniti Curtain Walling Bracket:
click here to download a pdf of more information
click here to request further information about The new Triniti Bracket

About Levolux | Health, Safety & Environment | Recruitment | Contact Levolux | Terms of Use | Privacy Policy | © 2000-2007 Levolux.