September 2013

Dating back to 1842, Topping Rose House hotel in Bridgehampton, New York, now boasts a new ‘studio’ building and four luxury cottages, all equipped with an attractive Timber Fin solar shading and screening solution from Levolux.

Topping Rose House1 200 x 200The beautifully restored Greek revival style mansion house, formerly a home of Judge Abraham Topping Rose and his family, is now complemented by a series of new buildings, offering luxury spa and leisure facilities, event space and guest accommodation. It has been transformed into a modern luxury refuge right in the heart of the Hamptons, just a short drive from Long Island’s long sandy beaches.

As a global leader in the design and delivery of solar shading and screening solutions, Levolux was invited to work closely with acclaimed architects from Roger Ferris + Partners, to provide solar control and privacy screening for the new buildings.

The ‘studio’ building and cottages required an effective, yet sympathetic form of solar control, applied externally across glazed openings. This reduces the exposure of glazing to direct sunlight, helping to maintain a cool and comfortable interior even on a hot summer’s day. Thanks to the pitch and angle of the Fins, this is achieved without compromising daylight levels and outward visibility.

Topping Rose House2 200 x 200Due to their naturally attractive appearance and to satisfy sustainability criteria, Timber Fins were selected to screen each building from top to bottom.

Manufactured from Western Red Cedar, Timber Fins were supplied with a custom ‘rhomboid’ shaped profile. The Fins, each measuring 150mm wide by 45mm thick, are arranged horizontally, incorporated into vertical and horizontal panels.

In total, 96 vertical panels have been applied extensively across the ‘studio’ building and the four cottages. Each panel comprises Fins with typical spans of 1.3 metres set at a pitch of 145mm.

Timber Fins extend up and across the two-storey ‘studio’ building on two elevations. Similarly, Timber Fins are used to screen each cottage, although here they extend upwards to form a 1 metre high balustrade, encircling a private roof terrace.

Topping Rose House3 200 x 200Individual Timber Fins incorporated into vertical panels are fixed at an angle of 5 degrees from horizontal, which allows rainwater to run off the facade, away from the building. By preventing water from pooling on the Fins, the timber will weather evenly, for a consistent appearance. The ‘rhomboid’ shaped profile ensures Fins can be angled, while front and rear surfaces remain vertical.

Timber Fins have also been incorporated into 20 horizontal panels that form two shading canopies, applied to the north and south-facing elevations of the ‘studio’ building. Each canopy measures 14 metres in length, 150mm thick and projects 1.3 metres from the glazed façade. The Timber Fins within each canopy are fixed on edge at 145mm centres, creating an effective form of Brise Soleil above ground floor openings.

The Western Red Cedar timber supplied by Levolux is FSC-certified, derived from sustainable sources, with a full chain of custody. The material was selected based on its lightweight, durable characteristics and its natural aesthetic. Over time the Timber Fins will acquire an attractive, silvery grey patina.

Topping Rose House4 200 x 200All aluminium components, including the supporting mullions and fascias, have been given a striking silver anodised finish. Steel brackets were galvanised and treated with a durable light grey polyester powder coating.

Topping Rose House, with its distinctive Greek revival styling, offers a rare glimpse of American architecture from the early 19th century, which became so popular during that period.

The recent addition of the ‘studio’ building and four cottages, which all feature external solar control and privacy screens, courtesy of Levolux, is perhaps indicative of a more sustainable style of architecture, which promises to become just as popular in the 21st century.